Photoelectric quad beams PB-50/100/200F

Single-channel synchronised quad beams for maximum stability in severe weather conditions.

Outdoor and indoor perimeter protection.


The professional choice in outdoor protection, our Quad beam detectors synchronise 16 beam paths for maximum stability in severe weather conditions, perfect for long range perimeter protection.

note: PB-F series Quad Beams are ‘Single Channel’ units for simple beam systems. For more complex systems eg. multiple stacked beams or in-line systems use PB-IN-HF series 4-Channel units to avoid ‘Crosstalk’.


  • 4 x synchronised high power beams
  • Double modulation for unsurpassed light immunity
  • Dynamic auto-gain lock (AGL)
  • ±90° horizontal ± 10° vertical adjustable sensor heads
  • 50,000 lux sunlight immunity
  • IP55 housing


  • Model: PB-50F – PB-100F – PB-200F
  • Detection system: Near infrared beam interruption system – 4 beam simultaneous interruption
  • Infrared beam: Double modulation pulsed beams by LED
  • Protection distance: Outdoor 50m (165ft) / Indoor 100m (330ft) – Outdoor 100m (330ft) / Indoor 200m (660ft) – Outdoor 200m (660ft) / Indoor 400m (1320ft)
  • Max. beam range (approx.): 500m (1650ft) – 1000m (3300ft) – 2000m (6600ft)
  • Response Time: 50msec. to 700msec. (Standard: 50msec.)
  • Power Supply: 10V to 30VDC (Non-polarity)
  • Current consumption: 75mA or less
  • Alarm output: Dry contact relay: NO or NC(selectable) – Reset : Interruption time + off-delay (approx, 1,5 sec.) – Contact capacity : 30V (AC/DC) 0,5A or less
  • Tamper output: Dry contact : NC – Contact operation : Output when cover is detached – Contact capacity : 30V (AC/DC), 0,5A or less
  • Alarm LED: Red LED (Receiver) lights when alarm is initiated
  • Attenuation LED: Red LED (Receiver) lights when beam reception attenuated
  • Functions: Tone indicator, Alarm memory indication, Programmed AGC, Auto-gain lock, Monitor Jack, Target color
  • Beam Adjustment: Horizontal : ±90° / Vertical : ±10°
  • Ambient temperature range: – 35°C to + 66°C (-31°F to +151°F)
  • Mounting positions: Outdoor(IP55)
  • Wiring: Terminals
  • Weight: Transmitter :1200g (42oz) | Receiver : 1300g (45,5oz)
  • Appearance: PC Resin (wine red)


If you need some information about related accessories, please consult us.


Datasheet PB 50-100-200F TAKEX

Manual PB 50-100-200F TAKEX


Request Information