Photoelectric quad beams PB-IN-50/100/200HF

The PB-IN-HF series is the flagship of the TAKEX range of infrared photoelectric quad beams. By synchronizing 16 beam paths between Transmitter and Receiver, the PB-IN-HF series offer unrivaled stability in perimeter security.


Coupled with channel separation and environmental (anti-fog) circuitry, the PB-IN-HF series has earned worldwide recognition as the standard our rivals aspire to.


  • 4 x synchronised high power beams
  • 4 selectable beam channels to prevent crosstalk
  • Environmental monitoring circuit
  • Dynamic auto-gain lock (AGL)
  • Vivid internal colour aids beam alignment procedure
  • Double modulation for unsurpassed light immunity
  • Auto-gain control (AGC)
  • 50,000 lux sunlight immunity
  • IP55 housing


  • Model: PB-IN-50HF – PB-IN-100HF – PB-IN-200HF
  • Detection system: Simultaneous breaking of 4 beams
  • Infrared beam: LED pulsed beam, Double modulation
  • Protection distance: Outdoor 500m (1650ft) or less / Indoor 100m (300ft) or less – Outdoor 100m (330ft 9or less / Indoor 200m (860ft) or less – Outdoor 200m (660ft) or less / Indoor 400m (1320ft) or less
  • Max. beam range (approx.): 500m (1650ft) – 1000m (3300ft) – 2000m (6600ft)
  • Response Time: 50msec. to 700msec. (Variable at pot)
  • Supply voltage: 12V to 30VDC (Non-polarity)
  • Current consumption: 60mA or less – 70mA or less – 85mA or less
  • Alarm output: Dry contact relay: NO or NC(selectable) – Reset : Interruption time + off delay time (approx, 1.5 sec.) – Contact capacity : 30V (AC/DC) 1A or less
  • Environmental output: Dry contact relay: NO or NC (selectable) – Contact operation : Output when environmental conditions worsen – Contact capacity : 30V (AC/DC) 0.5A or less
  • Tamper output: Dry contact : NC – Contact operation : Output when TX/RX cover is detached – Contact capacity : 30V AC/DC, 0.1A or less
  • Alarm LED: Red LED (Receiver) | ON : when an alarm is initiated
  • Sensitivity attenuation LED: Red LED (Receiver) | ON : when beam reception is attenuated
  • Functions: Modulated beam frequency selection, Tone indicator, Environmental module ,Beam power selection, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor Jack
  • Ambient temperature range: – 35° C to + 66° C (-31°F to +151°F)
  • Beam Adjustment: Horizontal : ±90° / Vertical : ±10°
  • Mounting positions: Indoor / Outdoor
  • Wiring: Terminals
  • Weight: Transmitter : 1200g (42oz) | Receiver : 1300g (45.5oz)
  • Appearance: PC resin (wine red)


If you need some information about related accessories, please consult us.


Datasheet PB-IN 50-100-200HF TAKEX

Manual PB-IN 50-100-200HF TAKEX


Request Information