eCopper™ – EECN1-LN1-R-Mz-B

The KBC Copper™ – EECN1-LN1-R-MZ-B 1-ch non-PoE industrial Ethernet over coax non-PoE transmitter, (1) fixed BNC and (1) fixed RJ-45 Ethernet port, 10/100Mbps auto-sensing. Input 12~24VDC. Compact module with clip mount.EECN1-LN1-R-Mz-B1-ch non-PoE industrial Ethernet over coax non-PoE receiver, (1) fixed BNC and (1) fix.

Ref. EECN1-LN1-R-Mz-B Categories: , Tags: , ,

Description

The KBC EECN1-LN1-R-Mz-B Its BNC port connects to coax and its 10/100M Base-T port connects to a switch. It provides connectivity to a 10/100Mbps IEEE standard twisted pair copper port over a 75ohm coaxial cable.  Varying data rates are supported depending on cable distance and quality.  The plug-and-play design ensures ease of installation with no electrical adjustment needed.  LED indicators are provided to show the operational status of the unit.

Most new systems are now HD or Megapixel IP cameras connected by CAT5/5e/6 cables or making use of existing fibers. The biggest challenge of upgrading older analog systems with coax cables to IP is the cabling. In most cases, it is cost prohibitive and often impractical to re-lay new cables. Using the existing coax to transmit HD and Megapixel IP cameras is the most economical choice. KBC have designed eCopper™ products to meet such constraints. The KBC EECN1-LN1-T-MX-B is a fully ruggedized Ethernet over coax transmitter and the EECN1-LN1-R-MX-B is a fully ruggedized Ethernet over coax receiver. This transmitter provides connectivity for one 10/100Mbps IEEE standard twisted pair copper port over a 75ohm coaxial cable. Varying data rates are supported depending on cable distance and quality. The plug-and-play design ensures ease of installation with no electrical adjustment needed. LED indicators are provided to show the operational status of the unit. The size of the transmitter is suited for fitting inside camera housing and where space is minimal.

Features:

  • Coax data rate >50Mbps (700m) based on coax quality
  • Complete protection design including surge protection, lightning protection

Specifications

Standards

Standards

  • IEEE Standards:
      • IEEE 802.3 10BASE-T
      • IEEE 802.3u 100BASE-TX
      • IEEE 802.3x Full-duplex

LAN Port:

  • Data Rate: 10/100Mbps auto-sensing Half & full duplex

Power

    • Power Input: >40Vdc PoC Consumption
    • Consumption: <2W (No PoE)

Coax Port

  • Cable: Coaxial Cable (75Ω)
  • Data Rate (1): >50Mbps (300m)

Operation Environment

    • Operating temperatura: -20℃-+70℃
    • Storage temperatura: -40℃-+85℃
    • Humidity (No-Condensing): 0-95%
    • Mean Time Between Failure (MTBF): > 100,000 Hours

Mechanical

    • Dimension (L×W×H): 29mm*37mm*76mm

Accesories

If you need some information about related accessories, please consult us.

Downloads

eCopper™ – EECN1-LN1-R-Mz-B

Video

Video not available

Request Information