MB - Single-sided protection perimeter tower (180°) for infrared photoelectric beams

Bunker perimeter solution description: 

MB is a perimeter tower for electronic photo beams, single-sided (180°), available in different heights, for floor installation.

Bunker Seguridad, perimeter security system manufacturer, presents an infrared tower model for medium (middle area) and long (perimeter) range sensors and photoelectric detectors MB. The special feature of this infrared tower model is that its main structure, composed of a curved anodized aluminium profile on the rear side gives to the infrared tower a physical aspect which fits perfectly not only to industrial environments, but it also fits into residential areas. On the other hand, it provides less resistance to the wind, thus meaning more stability of the photoelectric beams set inside and, as a consequence, of the installed perimeter security system. IR tower provides protection covering 180º.

Given that Bunker manufactures a wide range of perimeter products for solely residential areas, such as Garden Guard (MALTA, CAV and CAV-W), we refer to the MB infrared tower with the adjective “industrial”, even though in real situations both MB IR towers (180º) and PT security towers are installed very often in residential areas and they integrate perfectly their stylish design in the environment.

MB - Single side protection perimeter tower (180°) for infrared photoelectric beams
Perimeter Towers installed at a Power Plant
Solar Garden installation
Bunker perimeter security sensor reference: 

MB050, 50cm infrared tower / MB100, 1m infrared tower / MB150, 1.5m IR tower sensor

MB200, 2m tower for an infrared photo beam / MB300, 3m active infrared tower (AIR)

Bunker perimeter solution features: 

All the MB single-sided infrared tower models (180º) for perimeter security protection include the following components:

  • Black polycarbonate profile which allows the infrared rays, emitted by the photoelectric beam, to go through.
  • Black anodized aluminium profile which forms part of the IR tower structure, curved on the rear side.
  • Anti-sabotage tamper to be fixed on the upper side of the IR tower and to consequently avoid a possible manipulation of the perimeter security system by putting out of order a photoelectric sensor or even by cancelling an infrared photo beam.
  • Installation kit: it is composed of stainless screws, nylock nuts and expandable bolts.

In addition, 3m high infrared tower model (MB300), manufactured by Bunker Seguridad, is equipped with 70cm MB3SB side brackets. These give more stability to the infrared photo beams set inside, but also more rigidity to the electric tower which has an effect on the perimeter security system with less unwanted alarms.

Observations on Bunker perimeter detection solution: 

-          As a manufacturer, Bunker gives the possibility to adapt infrared tower’s height in case none of our 180º MB infrared tower references covers your perimeter security system requirements.

-          Single-sided (180º) MB perimeter security tower models, manufactured by Bunker, are floor-installation models. If you wish to fix IR tower on a wall, it is necessary to use MB-W range of infrared towers for perimeter security.

-          Single-sided (180º) MB is commercialised with minimum elements required to undertake an optimal photo beam perimeter security installation which does not need more accessories, nor extra fixations and in stable temperature ranges, without extremes. From here onwards, Bunker offers a wide range of accessories for our security towers which cover the majority of market requirements.

-          Single-sided MB infrared tower, manufactured by Bunker, is compatible with a vast majority of perimeter infrared photo beams on the market, such as TAKEX infrared photo beams with two beams (PB30TK, PB60TK, PB100TK, PB20TE, PB40TE, PB60TE, PB100ST) and also with TAKEX active IR photo beams (AIR) with four beams (PB50F, PB100F, PB200F, PBIN50HF, PBIN100HF, PBIN200HF, PBIN100AT), OPTEX photoelectric beams, ATSUMI Electric active infrared beams (AIR) and many more.

-          In order to make IR photo beam’s installation inside the BUNKER manufactured single-sided perimeter security tower easier, there are BEAG and PTSSL optional accessories (for OPTEX infrared photo beam sensor models AX70TN, AX130TN, AX200TN, AX100TF, AX200TF, AX100TFR and AX200TFR the whole range of OPTEX Smart Line (SL) with four beams SL200QN, SL350QN, SL650QN, SL200QDP, SL350QDP, SL650QDP, SL200QDM, SL350QDM, SL650QDM, SL350QNR, SL350QFR) and PTKH for photoelectric sensors, manufactured by TAKEX (PB50HF-KH, PB100HF-KH, PB200HF-KH). See “Accessories” paragraph for more information.

Bunker perimeter solution type: 
Download documentation on perimeter detection product: