FOGGY 30W - Fog Generator

Bunker perimeter solution description: 

White security fog generator with refilled tank and regular ER90 than can saturate an environment of up to 300 m3 in just 60 seconds.

FOGGY 30W - Fog Generator
FOGGY Fog Generator 30W
Fog Generator 30W
Observations on Bunker perimeter detection solution: 




  • Coverage Volumes: 10” activation: 100 m3 / 20” activation: 200 m3 / 60” activation: 300 m3 60” of pulsed activation: until 1900 m3
  • Tank capacity 1 liter 
  • Number of activations: 50 activations of 10” each - 16 activations of 360” each 
  • Special Function by optional module: wireless antirobbery
  • Nozzles available: 1 at 90° curtain with one jet (series) /3 with different angles and deliveries (optional) 
  • Supplying 220 Vac - Consumption during heating 600 Watt 
  • Maintenance consumption 60 / 120 Watt 
  • Back-up battery Yes 2x 12 Vdc 1,2Ah - Initial heating time 12 minutes - Heating time after an activation: max 3 minutes 
  • Functioning during mains 220 Vac absence: max 1 hour - Size (LxHxD) 358 x 264 x 166 mm - Weight 15 kilos - Status indication by led and display - Inputs for system arming: according to alarm system on/off 
  • First stage: pre-alarm – second stage: alarm – jet activation 
  • Indication outputs: Delivery on – Tampering, Liquid Level, Technical trouble, Mains absence, Battery level, Damaged battery, Pump malfunctioning, PCB temperature, Heater temperature
  • Output 12 Vdc - System cabling universal standards with outputs at free exchange 
  • Serial RS485 dedicated to AVS Electronics systems
  • Events memory 1000 events 
  • System diagnosis: Via USB connection on the control PCB With GSM remote connection by optional PCB XGSM 
  • Firmware updating via PC with dedicated software 
  • Metal housing WHITE color.
Bunker perimeter solution type: 

ER160: It makes a single jet with 60º inclination. Recommended for ceiling installation.

ER360: It makes three single jets with 60º inclination. Recommended for wall installation.

ER390: It makes three single jets for a better opening to fog delivery. Recommended for ceiling installation.

PRL10: It alows to extension the nozzle of 10cm. Recommended for installation between ceiling and countertop.

KEY ER: Socket wrench for an easy nozzle remove.

LBL: Adhesive label to stick near the protected area to show and wam about lack of visibility caused by the activation of the system.

LFL: Suggested to lift FOGGY when installed between ceiling and countertop.

SRB10: Steel tank: allow the recharge of 1 liters liquid. Sensor of liquid level managed by microprocessor with indication of low liquid level.

SRB15: Steel tank: allow the recharge of 1,5 liters liquid. Sensor of liquid level managed by microprocessor with indication of low liquid level.