easyPack prewired towers (360°), 3m

Bunker perimeter solution description: 

Prewired double-sided tower (360°) with all the basic components, ready to be installed (3m).

3 metres
easyPack prewired towers double side protection (360°) and 3 metres high
Bunker perimeter security sensor reference: 

D304RR - D304TT - D304TR - D306RR - D306TT - D306TR -D308RR - D308TT - D308TR

Bunker perimeter solution features: 

Each reference includes a central body in aluminium, two polycarbonate profiles, top/bottom covers and also an anti-sabotage tamper switch, as many heaters as photoelectric sensors (transmitters or receivers), a thermostat and a mother board that manages all the system.

Everything is prewired and mounted together with the IR beams (*) - chosen by the customer - and their mounting back plates.

(*) Compatible with different models of photobeams (TAKEX, OPTEX, ATSUMI and others). These are not included in price. easyPack can also be supplied without photobeams.

Besides, it includes 70cm side brackets (MB3SB).

Additionally as an option, you can acquire other accessories for easyPack prewired beam towers such as fans and/or power supplies as well as the other usual Bunker's beam towers' accessories (anti-climb top tamper, concrete floor bracket, etc.). For more information see “Accessories” paragraph.

Available models, 3 m high:

  • D304RR – 3m, 360° tower ready for 2 Rx on each side.
  • D304TT – 3m, 360° tower ready for 2 Tx on each side.
  • D304TR – 3m, 360° tower ready for 2 Tx on one side and 2 Rx on the other side.
  • D306RR – 3m, 360° tower ready for 3 Rx on each side.
  • D306TT – 3m, 360° tower ready for 3Tx on each side.
  • D306TR – 3m, 360° tower ready for 3 Tx on one side and 3 Rx on the other side.
  • D308RR – 3m, 360° tower ready for 4 Rx on each side.
  • D308TT – 3m, 360° tower ready for 4 Tx on each side.
  • D308TR – 3m, 360° tower ready for 4 Tx on one side and 4 Rx on the other side.


(Tx = transmitter/s; Rx= receiver/s)

Observations on Bunker perimeter detection solution: 

This is a very flexible perimeter solution which can be adapted to the requirements of each installation, both regarding beams towers’ format and the number and model of sensors included. With the easyPack photoelectric beam towers you will get all the components previously fixed, wired and carefully organized in the beam tower, you just have to align your preferred IR active photoelectric beams from Takex, Optex or others.

Ground mounting. For wall-mounting the accessory PTWB is required.

Bunker perimeter solution type: 
Download documentation on perimeter detection product: