Photoelectric Beams TXF-125E TAKEX

Bunker perimeter solution description: 

The TXF-125E is a battery operated quad photoelectric beam sensor designed for compatibility with leading wireless systems; reducing the time and cost of permanent installations and allowing the use of Active Infrared Beams on rapid deployment or temporary installations. With 4 selectable frequencies, multiple beam sets can be used in both linear and stacked configurations without risk of crosstalk, further assisted by a transmitter power function that allows the user to set 25/50/75/100m zones.

Two 3.6V (17Ah) batteries can power each unit for approximately 5 years of service, and ±90° horizontal/±20° vertical adjustable optics cater for the most dynamic of terrains.

  • 4 x synchronised high power beams. Power setting: up to 25m. 4 beam channels
  • 4 x synchronised high power beams. Power setting: up to 50m. 4 beam channels
  • 4 x synchronised high power beams.Power setting: up to 75m. 4 beam channels
  • 4 x synchronised high power beams.Power setting: up to 100m. 4 beam channels
Photoelectric beams TXF-125E TAKEX
Bunker perimeter security sensor reference: 

TXF-125E TAKEX

Download documentation on perimeter detection product: 
Specifications: 

Model

TXF-125E

Detection system

Near infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption)

Infrared beam

Single modulation pulsed beam by LED (near infrared beam light-emitting diode)

Protection distance

Outdoor 330ft (100m) or less

Beam power setting

330ft (100m) / 245ft (75m) / 165ft (50m) / 82ft (25m)

Response time

0.05 sec, 0.10 sec, 0.25 sec, 0.5 sec

Battery

SAFT: LS 33600 (or equivalent) 3.6V, 17Ah

Battery life

Transmitter = Up to 5 years* (2 batteries)
Receiver = Up to 5 years* (2 batteries)
*Approximate, not guaranteed

Beam adjustment

Horizontal: ±90°, Vertical: ±20°

Alarm LED

Red LED (Receiver) ON: when an alarm is initiated

Attenuation LED

Red LED (Receiver) ON: when an alarm is initiated

Ambient temperature range

-10°C to +50°C (14°F to 122°F)

Functions

Modulated beam frequency selection
Tone indicator
Repeat output
Monitor jack
Response time adjustment
Upper/Lower beam switch
Low battery indication
Wireless alignment checker connecting function
Battery saving function
Battery sharing

IP rating

IP65

Mounting positions

Outdoor, Indoor

Weight

Transmitter: 1.5kg (without batteries), Receiver: 1.5kg (without batteries)

Appearance

Cover: PC resin (Wine Red), Base: ASA resin (Black)

Number of beams: 
4
Bunker perimeter solution type: 
Trademark: