Photoelectric Beams PXB 50/100/200HF TAKEX

Bunker perimeter solution description: 

When there is no room for compromise, professional installers and specifiers can rely on the enhanced features of our flagship PXB range. Coupled with the ER-02 wireless alignment tool, the integrated self diagnostic function ensures perfect alignment every time.

  • 4 x synchronised high power beams. Beam range: up to outdoor 50m / 100m indoor.
  • 4 x synchronised high power beams. Beam range: up to outdoor 100m / 200m indoor.
  • 4 x synchronised high power beams. Beam range: up to outdoor 200m / 400m indoor.
Photoelectric beams PXB-50-100-200HF Series TAKEX
Bunker perimeter security sensor reference: 

PXB 50/100/200HF TAKEX

Bunker perimeter solution features: 
  • 4 x synchronised high power beams
  • 4 selectable beam channels to prevent crosstalk
  • double modulation for unsurpassed light immunity
  • increased beam separation minimises nuisance alarms
  • vivid internal colour aids beam alignment procedure
  • lightning and surge protection up to 15kV
  • environmental monitoring circuit
  • dynamic auto-gain lock (AGL)
  • 50,000 lux sunlight immunity
  • IP65 housing

 

Download documentation on perimeter detection product: 
Specifications: 

Model

PXB-50HF

PXB-100HF

PXB-200HF

Detection system

Simultaneous breaking of 4 beams

Infrared beam

LED pulsed beam, Double modulation

Protection distance

Outdoor 50m
or less
Indoor 100m
or less

Outdoor 100m
or less
Indoor 200m or less

Outdoor 200m or less
Indoor 400m or less

Max. beam range (approx.)

500 m

1000 m

2000 m

Response time

50msec. to 700msec. (Variable at pot)

Supply voltage

12 V a 30 VDC (Non-polarity)

Current consumption

30mA or less

32mA or less

34mA or less

Alarm output

Dry contact relay output form C
Contact action : Interruption time + delay time (2 sec.)
Contact capacity : 30V (AC/DC) 1A (resistive load)
Protective resistor

 Environmental output

Dry contact relay output form C
Contact action : Output when environmental conditions worsen
Contact capacity : 30V (AC/DC) 1A (resistive load)
Protective resistor

 

Tamper output

Dry contact relay 1b
Contact action : Activated when TX/RX cover is detached
Contact capacity : 30V (AC/DC) 0.1A (resistive load)
Protective resistor

Alarm LED

Red LED (Receiver) | ON : when an alarm is initiated

Sensitivity attenuation LED

Red LED (Receiver) | ON : when beam reception is attenuated

Funciones

Modulated beam frequency selection, Tone indicator, Environmental module, Beam power selection, Transmitting power adjustment, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor Jack, Tamper, Response time adjustment, Upper/Lower beam switch, Wireless checker

Ambient temperature range

- 35° C to + 66° C

Beam adjustment

Horizontal: ± 90°, Vertical: ± 20°

Mounting positions

Indoor / Outdoor

Wiring

Terminals

Weight

Transmitter : 1400g / Receiver : 1470g

Appearance

PC resin (wine red)

Number of beams: 
4
Bunker perimeter solution type: 
Trademark: