Photoelectric Beams Series PB-IN-50HF/100HF/200HF TAKEX

Bunker perimeter solution description: 

The PB-IN-HF series is the flagship of the TAKEX range of infrared photoelectric beams. By synchronizing 16 beam paths between Transmitter and Receiver, the PB-IN-HF series offer unrivaled stability in perimeter security. Coupled with channel separation and environmental (anti-fog) circuitry, the PB-IN-HF series has earned worldwide recognition as the standard our rivals aspire to.

 

Photoelectric beams series PB-IN-50HF/100HF/200HF TAKEX
Bunker perimeter security sensor reference: 

PB-IN-50HF/100HF/200HF SERIES TAKEX

Bunker perimeter solution features: 
  • 4 x synchronised high power beams
  • 4 selectable beam channels to prevent crosstalk
  • environmental monitoring circuit
  • dynamic auto-gain lock (AGL)
  • vivid internal body stickers aid beam alignment procedure
  • double modulation for unsurpassed light immunity
  • auto-gain control (AGC)
  • 50,000 lux sunlight immunity
  • IP55 housing
Download documentation on perimeter detection product: 
Specifications: 

Model

PB-IN-50HF

PB-IN-100HF

PB-IN-200HF

Detection system

Simultaneous breaking of 4 beams

Infrared beam

LED pulsed beam, Double modulation

Protection distance

Outdoor 165ft
or less
Indoor 330ft or less

Outdoor 330ft
or less
Indoor 660ft or less

Outdoor 660ft
or less
Indoor 1,320ft
or less

Max. beam range (approx.)

1,650ft

3,300ft

6,600ft

Response time

50msec. to 700msec. (Variable at pot)

Supply voltage

12V to 30VDC (Non-polarity)

Current consumption

60mA or less

70mA or less

85mA or less

Alarm output

Dry contact relay : NO or NC (selectable)
Reset : Interruption time + off delay (approx. 1.5 sec.)
Contact capacity : 30V (AC/DC) 1A or less

Environmental output

Dry contact relay : NO or NC (selectable)
Contact operation : Output when environmental conditions worsen
Contact capacity : 30V (AC/DC) 0.5A or less

Tamper output

Dry contact : NC
Contact operation : Output when TX/RX cover is detached
Contact capacity : 30V AC/DC, 0.1A or less

Alarm LED

Red LED (Receiver) | ON : when an alarm is initiated

Sensitivity attenuation LED

Red LED (Receiver) | ON : when beam reception is attenuated

Functions

Modulated beam frequency selection, Tone indicator, Environmental module, Beam power selection, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor Jack

Ambient temperature range

- 35°C to +66°C (-31°F to +151°F)

Beam adjustment

Horizontal : ±90°, Vertical : ±10°

Mounting positions

Indoor / Outdoor

Wiring

Terminals

Weight

Transmitter : 42oz | Receiver : 45.5oz

Appearance

PC resin (wine red)

Number of beams: 
4
Bunker perimeter solution type: 
Trademark: